The details at the time of production can determine whether the product is prepared for high-quality production, especially for the more conspicuous colors, the product is too dirty, and the customer will definitely not be recognized, so clean up in advance during production The stains on the machine and hands should be covered with clean adhesive tape after the raw materials are placed to prevent the ash layer from falling off. When placing the raw materials, place them as quickly as possible and minimize exposure to the air because the silica gel has a strong adsorption force and is a non-silicone button. It is often easy to absorb dust, so now many silicone rubber product manufacturers have implemented dust-free production workshops to prevent products from being messy.

Secondly, there are many problems on the mold. The mold needs to be cleaned with mold washing water to ensure that there is no oil stains. Then the mold will be dirty during the first few molds. The mold will be sprayed with the mold release water. A large amount of substances on the table are sprayed into the mold core. Secondly, the mold is relatively rough, and there are a lot of dirt close to the mold and cannot be cleaned. Then we can seal the ring by manually adding water or acetone to the mold to clean the inside of the mold.

The product is bad and unstable for a long time. There are sundries in the silicone material, but it is a headache for many silicone product manufacturers nowadays. For large-volume product production, many small black spots or dirt may occasionally appear. The main reason is Manufacturers cause more problems during production, but there are also many dirty materials on the raw materials. However, with the development of different processes in the rubber mixing process, the raw materials are dirty, and unnecessary losses can be avoided. Silicone products are not timely when the materials are dirty. All of the findings lead to poor finished products produced by molding and vulcanization, and there are many reasons for the dirty products.